Filter
Top Products
SERVICE MODE
PROJECTOR SET-UP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
Select with or
then <ENTER>
<EXIT> to return
61
What can be done?
Within the memory management menu, the following items can be consultated or executed :
- copy a block
- delete a block
- delete all blocks
- set to midposition
Ho
w to select?
To select Memory Management:
1. Push the cursor key or to highlight Memory Management (menu 1).
2. Press ENTER to select. The memory management menu will be displayed (menu 2).
Memory Management
menu 1
MEMORY MANAGEMENT
COPYA BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then <ENTER>
<EXIT> to return
menu 2
Copy a Block
What can be done?
The copy a block function copies the settings of a selected block into the active block.
How to copy?
To copy a block :
1. Push the cursor key or o highlight 'Copy a Block' (menu 1).
2. Press ENTER to select.
The copy menu will be displayed (menu 2).
To copy the settings of a closed block to the block you are working on (active block),
3. Push the cursor key or to select a block.
4. Press ENTER to copy the selected block.
All current settings will be overwritten with the settings of the block which is copied.
A confirmation screen will be displayed (menu 3).
5. ENTER to confirm. EXIT cancels the copy procedure and returns without copying the block.
MEMORY MANAGEMENT
COPYA BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
SET TO MIDPOSITION
Select with or
then <ENTER>
<EXIT> to return
menu 1
CHANGE PASSWORD
Password will be
reprogrammed as xxxx
<ENTER> to confirm
<EXIT> to cancel
!
menu 3
COPY MODE
Nr. Src Fh Fv inp conf
1 1 15.6 50 video FC
2 3 31.2 60 RGB3S RT
3 - 15.6 50 intern FC
4 2 31.5 50 RGB3S FC
5 - 33.7 60 intern FC
6
7
8
Active block nr. 1
Select with or
<ENTER> to copy
<EXIT> to return.
menu 2