Filter
Top Products
48
How to adjust the Blanking?
Adjust the next blanking alignments until the image is correctly framed or the unwanted information is blanked
out (image 1).
To enter a blanking alignment :
1. Push the cursor key or to highlight the desired blanking position.
2. Press ENTER to select.
3. Press the cursor key or to adjust the blanking.
4. Press ENTER to continue.
Top Blanking
Right Blanking
Bottom Blanking
Left Blanking
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return
Correct by pushing the cursor keys
to the right or to the left
Correct by pushing the cursor keys
up or down
Adjustment of the blanking on the of the image
Adjustment of the blanking on the bottom of the image
Adjustment of the blanking on the left side
Adjustment of the blanking on the right side