Filter
Top Products
33 How to set
English
Main menu configuration
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE
<RECORD SET>
1.NORMAL REC EASY SET ->
2.RECORDING AREA SET ->
3.RECORDING CONDITIONS SET ->
4.NORMAL REC MODE SET ->
5.PROGRAM REC SET ->
6.TIMER SET ->
7.ALARM REC MODE SET ->
8.ALARM OPERATION SET ->
MOVE:JOG SELECT:SHUTTLE
<INITIAL SET>
1.LANGUAGE/CLOCK SET ->
2.CAMERA DETECT ->
3.TITLE SET ->
4.HOLIDAY SET ->
5.TIME PERIOD SET ->
MOVE:JOG SELECT:SHUTTLE
<SCREEN SET>
1.MULTI SCREEN : NORMAL
QUAD POSITION SET ->
MULTI 9 POSITION SET ->
MULTI 16 POSITION SET ->
2.SEQUENCE : 1SEC
SEQUENCE SET ->
MAIN/MON.2 MONITOR SET ->
3.MASK : OFF
MASK SET ->
4.COLOR LEVEL SET ->
<GENERAL SET>
1.DISPLAY SET ->
2.BUZZER SET ->
3.SECURITY LOCK SET ->
4.HDD SET ->
5.NETWORK SET ->
6.RS-485 SET ->
7.CAMERA CONTROL SET ->
MOVE:JOG SELECT:SHUTTLE
<INITIALIZATION LOG>
DATE TIME AREA
10-26 18:25 ALL AREAS (INITIALIZED)
10-26 23:18 ALL AREAS (INITIALIZED)
10-26 23:18 ARCHIVE (AREA RESET)
10-26 23:18 ALARM REC (AREA RESET)
10-26 23:18 NORMAL REC (AREA RESET)
10-26 23:16 ALL AREAS (INITIALIZED)
10-26 23:15 ALL AREAS (INITIALIZED)
----- --:-- ------ (------)
<COPY MENU SETTINGS>
SAVE MENUS TO CF ->
DVR TYPE VER. SA16-04
LOAD MENUS FROM CF ->
COPY RECORDING AREA SETTINGS: NO
*IF YOU CHOOSE 'YES' OF THE ABOVE MENU,
HARD DISK WILL BE INITIALIZED !
<POWER LOSS/USED TIME>
POWER LOSS RECOVER
#011 01-14 19:15 01-14 09:55
01-05 21:13 01-14 09:21
01-03 18:48 01-05 08:56
01-01 09:49 01-03 10:32
USED TIME DISK1 USE : 00096H
DISK2 USE : -----H
POWER : 00096H
F/W : M 1.00-00 / S 1.00-00
The main menu consists of seven items, and can be
displayed by pressing the MENU button.
b Copy the contents of the menu settings of
this DVR and operate another unit of the
same model with the same menu (P82)
b Entering numbers using buttons
Normally, numeric values and channels (camera
numbers) are set using the J-dial, but camera
selection buttons and the QUAD button on the front
panel can also be used for settings.
A value can be input using the button below when
"K" is displayed on the upper right corner of the
screen.
• Camera selection button 10 and QUAD button:
0 is displayed.
• Camera selection buttons 1~9:
Displays the number of the button pressed.
67812
910
3
45
K
QUAD
=
b Recording and alarm settings (P39)
b Generic settings (P62)
b Special settings (display shunt, automatic
scrolling, masking, tone adjustment) (P74)
b Power outage time, hard disk's hours of use, etc.
(P80)
b Hard disk initialization, initialization log display
(P81)
b Default value settings (P34)