Sanyo DSR-3716 DVR User Manual


 
Recording settings
47 How to set
English
1
Display the <RECORDING CONDITIONS SET> screen as
explained in "Displaying the recording settings screen"
(P39).
2
Turn the J-dial to select "OVERWRITE" for the normal or
the alarm recording area, and then turn the S-dial
clockwise.
3
Turn the J-dial, select "OFF", and turn the S-dial
clockwise.
The "REMAINING DISK WARNING" changes from "**" to
"1%", and disk overwrite is prohibited.
If the available capacity in the normal or alarm recording
area drops below 1%, the corresponding FULL indicator on
the front panel of the DVR will start blinking.
4
Changing the "REMAINING DISK WARNING" level
1 Turn the J-dial to select "REMAINING DISK
WARNING", and then turn the S-dial clockwise.
2 Turn the J-dial to select remaining level (example:
5%), and then turn the S-dial clockwise.
The cursor moves to "SERIES RECORDING".
Selections: 1%, 2%, ... 9%, 10%
5
Press the EXIT/OSD button to end the setting
procedure.
If multiple DVR units are connected, recording can be
automatically continued on the next DVR when the recording
area of the first one becomes full.
1
Connect the SERIES OUT terminal of the CONTROL
terminal block on the rear panel of the first DVR to the
SERIES IN terminal of the next DVR.
C-1
Overwrite setting for the recording
areas
MENU
(J)
(S)
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
RECORDING DISK WARNING : **
SERIES RECORDING : ON
AUTO DELETE : OFF
3.RECORDING CONDITIONS SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
(J)
(S)
NORMAL RECORDING AREA
OVERWRITE : OFF
ALARM RECORDING AREA
OVERWRITE : OFF
REMAINING DISK WARNING : 1%
SERIES RECORDING : ON
AUTO DELETE : OFF
<RECORDING CONDITIONS SET>
EXIT/OSD
C-2 Setting series recording
Use cables no longer than 3m between the DVR units for
serial connection.
Connect the MIC terminal and the AUDIO terminal as
shown below.
SERIES IN
SERIES OUT
(First DVR unit)
(Second DVR unit)
(Third DVR unit)
(Fourth DVR
and more)
Microphone (sold separately)
Amplifier (sold separately)