Filter
Top Products
Recording settings
43 How to set
English
This screen is used to verify the total capacity of the hard disk, and the recording capacity of the individual recording areas.
The recording areas can be modified as needed. Modifying the recording areas will result in initializing the hard disk, and all
recordings to be erased. Save the recordings to some other media before modifying the recording areas.
1 Displays the total capacity of the internal hard disk of the
DVR.
If the hard disk is replaced, the total capacity will change.
2 Sets the recording capacity of the normal recording area.
The default setting is 80%; it can be manually modified up
to 99%.
If the normal recording area is set to 0%, video is only recorded
in the alarm recording area.
3 Resets all the recording areas.
4 Sets the recording capacity of the alarm recording area.
The default setting is 19%; it can be manually modified up
to 99%.
• A maximum of 16,000 alarm events can be recorded on one
hard disk. Hard disk expansion allows for a maximum of
32,000 events. Note that the recording conditions will
depend on the recording settings.
5 Sets the capacity of the archive area.
The default setting is 1%; the upper limit is 99%. This area
cannot be set manually.
b Verifying the capacity of the recording areas
1
Display the <RECORDING AREA SET> screen as
explained in "Displaying the recording settings screen"
(P39).
2
Press the EXIT/OSD button to end the setting
procedure.
B Recording area menu description
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
80%
80%
80%
19%
19%
19%
1%
1%
1%
1
2
3
4
5
Alarm recording
area
Archive area
Normal recording area
Hard disk recording areas
MENU
(J)
(S)
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
2.RECORDING AREA SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
EXIT/OSD