Filter
Top Products
Basic settings
35 How to set
English
Automatic switching from standard time to daylight saving
can be set.
1
Display the <LANGUAGE/LANGUE/IDIOMA> screen as
explained in "Displaying the basic settings screen"
(P34).
2
Turn the J-dial, select the MODE under <DAYLIGHT
SAVING>, and turn the S-dial clockwise.
The "USE" starts blinking.
3
Turn the J-dial clockwise , select USE and then turn the
S-dial clockwise.
Selections:
USE: Automatic switching to daylight saving
NO USE: No automatic switching to daylight saving
The cursor moves to the "ON" field. Set the start and end
time of daylight saving.
1 Turn the S-dial clockwise.
Move the cursor to the "1ST" field under "WEEK".
2 Select the week by turning the J-dial, and turn the
S-dial clockwise.
Repeat the same procedure for setting the MONTH and
the TIME fields. The cursor moves to the "OFF" field.
Selections:
WEEK:
LST, 1ST, 2ND, 3RD, 4TH-SUN, MON, TUE, WED, THU,
FRI, SAT
3 Turn the S-dial clockwise to move the cursor to the
"LST" field under "WEEK".
4 Select the week by turning the J-dial, and turn the
S-dial clockwise.
Repeat the same procedure for setting the MONTH and
the TIME fields.
Connect the CLOCK OUT terminal of the CONTROL terminal
block on the rear panel of the DVR to the CLOCK IN terminal
of the second DVR (P34: Figure 1), and move the cursor to
<EXT. CLOCK SET>.
1
Turn the S-dial clockwise until "01" starts blinking.
2
Turn the J-dial to select the hour (example: 05), and
then turn the S-dial clockwise.
The minutes cannot be set.
3
Press the EXIT/OSD button.
This completes the setting of the first DVR.
4
Display the same menu on the second DVR, set the
same hour, and press the EXIT/OSD button.
The display on both DVRs switches to the normal screen
and both will be set to 5 o'clock.
1
Display the <WARNING> screen as explained in
"Displaying the basic settings screen". (P34)
The <WARNING> screen is displayed, and "NO" is blinking.
2
Turn the J-dial, select "YES", and turn the S-dial
clockwise.
After detecting the connected cameras, the display returns
to the <INITIAL SET> screen. Press the EXIT/OSD button.
A Daylight saving setting
1.LANGUAGE/CLOCK SET
1.INITIAL SET
<MAIN MENU>
<INITIAL SET>
<LANGUAGE/LANGUE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2006 SUN 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
MENU
(J)
(S)
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
A-1
External clock setting
(EXT. CLOCK SET)
B Camera detection
ADJUST.TIME 01:00
ADJUST.TIME 01:00
05:00
05:00
(S)
(J)
(S)
EXIT/OSD
MENU
(J)
(S)
2.CAMERA DETECT
1.INITIAL SET
<MAIN MENU>
<INITIAL SET>
<WARNING>
CAMERA DETECT
CONTINUE?
NO
EXIT/OSD