Filter
Top Products
Recording settings
How to set 46
English
This menu is used to set whether to continue recording and automatically overwrite data, or stop recording without overwriting
the data when the normal recording area and the alarm recording area of the hard disk become full.
1 Selects the "OVERWRITE" setting for the normal recording
area.
ON: When the normal recording area becomes full, the new
recordings will automatically overwrite existing video,
starting with the oldest recordings.
OFF: When the normal recording area becomes full,
automatically stop recording.
2 Selects the "OVERWRITE" setting for the alarm recording
area.
ON: When the alarm recording area becomes full, the new
recordings will automatically overwrite existing video,
starting with the oldest recordings.
OFF: When the alarm recording area becomes full,
automatically stop recording.
3 REMAINING DISK WARNING
Sets the "FULL" indicator to blink when the remaining hard disk
capacity drops below the specified volume.
When "OVERWRITE" is turned "OFF" for the recording areas,
the REMAINING DISK WARNING changes from "**" to "1%".
Selections: 1%, 2%, ... 9%, 10%
4 SERIES RECORDING (P47)
If multiple hard disk recorders are connected, once the first
hard disk becomes full the second disk can take over the
recording. In the same way from the third disk on the recording
is taken over in sequential order.
5 AUTO DELETE (recording storage period)
Sets the storage period for video recorded in the normal and
alarm recording areas. When the storage period has expired,
the data will be automatically deleted.
Before using this setting, save the necessary videos to the
archive area or to a CompactFlash card.
Selections: OFF, 1, 2, 3 ... 98, 99 days
b Remaining hard disk capacity warning
(Monitor: Operation display)
When "OVERWRITE" is "OFF", the operation display will switch
to show the remaining hard disk capacity.
(DVR)
For example, if 5% is set, then when 5% of the hard disk
capacity remains, the warning indicator (FULL) will start
blinking. If there is no more capacity left, the indicator will
change from blinking to continuously lit, and recording will stop.
C Recording conditions menu description
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES RECORDING : OFF
AUTO DELETE : OFF
1
2
3
4
5
10-26-06 02:20:20 REC REPEAT 5%
10-26-06 02:20:20 REC 5% EN A ALARM 0000
ALARM FULL indicator
FULL indicator