Filter
Top Products
Recording settings
How to set 44
English
This operation will initialize the hard disk.
1
Display the <RECORDING AREA SET> screen as
explained in "Displaying the recording settings screen"
(P39).
2
Turn the S-dial clockwise.
The "NORMAL RECORDING AREA : 80" starts blinking.
3
Turn the J-dial to set the "NORMAL RECORDING AREA"
to 50% (example) and turn the S-dial twice clockwise.
The cursor moves to "ALARM RECORDING AREA" and the
value starts blinking.
4
Turn the J-dial to set the "ALARM RECORDING AREA"
(49% in the example), and turn the S-dial clockwise.
The cursor moves to "AREA FULL RESET" of the archive
area settings.
5
Turn the S-dial clockwise.
The <WARNING> screen is displayed, and "NO" is blinking.
6
Turn the J-dial, select "YES", and turn the S-dial
clockwise.
The "HDD INITIALIZING!" message appears, and the
initialization starts.
When the initialization is complete, the <HDD SET> screen
returns.
7
Press the EXIT/OSD button.
B-1 Changing the normal recording area and the alarm recording area
Note:
The default setting in <RECORDING CONDITIONS SET> for
the normal and alarm recording areas is "OVERWRITE: ON".
Therefore, after setting the normal and alarm recording areas,
the cursor will not move to "AREA FULL RESET". In order to
use "AREA FULL RESET" for the normal and alarm areas, set
the OVERWRITE setting to "OFF" under <RECORDING
CONDITIONS SET>. (P47)
MENU
(J)
(S)
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
2.RECORDING AREA SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
ALARM RECORDING AREA : 19%
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : OFF
ALARM RECORDING AREA
OVERWRITE : ON
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
HDD INITIALIZING !
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
EXIT/OSD