Filter
Top Products
General settings
65 How to set
English
This menu is used to set passwords and to limit access to the
DVR. There are two passwords, one for the administrator, and
one for the user.
1 ADMIN
This item is used to enter the administrator's password
(numerals 0, 1~9 and the letters A~Z can be used for
passwords). The ON/OFF setting enables or disables the
security lock.
• The password must be between 4~8 characters long. If the
password entered is shorter than 4 characters, the
password will be erased, and a new entry will be required.
• If the "OFF" setting is selected, that means the security lock
will not be used, therefore the USER field will be disabled
and the user password cannot be entered.
• If the administrator password is set, and correctly entered,
all operations will be accessible.
2 USER
This item is used to enter the user's password (numerals 0, 1~9
and the letters A~Z can be used for passwords). The ON/OFF
setting in the USE column enables or disables the security lock.
• The password must be between 4~8 characters long. If the
password entered is shorter than 4 characters, the
password will be erased, and a new entry is required.
3 REC CONTROL
This setting is used to give access to the recording operations.
ADMIN: Only the administrator can control the recording
operations. The user cannot control the recording
operations.
USER: The user can also control the recording operations.
4 CAMERA CONTROL
This setting is used to give control access to the dome
cameras.
ADMIN: Only the administrator can control the cameras. The
user cannot control the cameras.
USER: The user can also control the cameras.
Refer to P67 for information on the control rights after setting
the passwords.
1
Display the <SECURITY LOCK SET> screen as
explained in "Displaying the general settings screen",
and then turn the S-dial clockwise. (P62)
The first dash ("–") of the ADMIN setting starts blinking.
2
Set the ADMIN password (example: 12345AB).
1 Turn the J-dial, select "1", and then turn the S-dial
clockwise.
Repeat the operation to enter the rest of the password.
The cursor moves to "OFF".
2 Turn the J-dial to select "ON", and then turn the
S-dial twice clockwise.
The password entry area of the USER starts blinking.
3
Set the USER password (example: AB12345).
1 Turn the J-dial, select "A", and then turn the S-dial
clockwise.
Repeat the operation to enter the rest of the password.
The cursor moves to "OFF".
2 Turn the J-dial to select "ON", and then turn the
S-dial twice clockwise.
The "ADMIN" field of REC CONTROL starts blinking.
4
Turn the J-dial to select ADMIN or USER, and then turn
the S-dial twice clockwise.
The "ADMIN" field of CAMERA CONTROL starts blinking.
5
Turn the J-dial to select ADMIN or USER, and then turn
the S-dial clockwise.
The cursor moves back to the ADMIN line.
6
Press the EXIT/OSD button.
C Security lock menu description
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER -------- OFF
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
1
3
2
4
C-1
Turn ON the ADMIN and USER security
locks and set passwords for the DVR
MENU
(J)
(S)
<SECURITY LOCK SET>
LEVEL PASSWORD(4-8) USE
ADMIN -------- ON
USER -------- OFF
REC CONTROL : ADMIN
CAMERA CONTROL : ADMIN
3.SECURITY LOCK SET
3.GENERAL SET
<MAIN MENU>
<GENERAL SET>
ADMIN
12345AB- ON
USER
AB12345- ON