Filter
Top Products
Recording settings
59 How to set
English
1
Set "TIME PERIOD A" and "TIME PERIOD B" using
<TIME PERIOD SET> (P37).
2
Display the <ALARM REC MODE SET> screen as
explained in "Displaying the recording settings screen",
and then turn the S-dial clockwise. (P39)
The "OFF" field of ALARM RECORDING starts blinking.
3
Display the motion sensor screen
1 Turn the J-dial to select "ENABLED" for ALARM
RECORDING, and then turn the S-dial clockwise.
2 Turn the J-dial, select ALARM TRIGGER, and turn the
S-dial clockwise.
Selections:
ALARM/SENSOR/ALARM AND SENSOR/ALARM OR
SENSOR
3 Turn the J-dial to select "SENSOR", and then turn the
S-dial twice clockwise.
The motion sensor screen is displayed.
4
Set the SENSOR.
Example:
• Camera number selection: Channel 3 (CH03)
• Time period A: T-1
• LEVEL: 2
• MODE (detection method): A AND B
1 Press camera selection button 3.
The channel display changes to "CH03".
2 Turn the J-dial to move the cursor to the desired
sensor location, and then turn the S-dial clockwise.
3 Turn the J-dial, set the sensor to "A", and turn the
S-dial clockwise.
When "A" is accepted, the cursor moves to the right, to
the next position.
Repeat the procedure to move the cursor, and set the
sensor for A and B.
4 Turn the J-dial to move the cursor to the time period
selection "T-1", and then turn the S-dial clockwise.
The "T-1" indicator starts blinking.
5 Turn the J-dial to select "T-2", and then turn the
S-dial twice clockwise.
The "OFF" indicator of LEVEL starts blinking.
6 Turn the J-dial to select LEVEL to "2", and then turn
the S-dial twice clockwise.
The "A" field of MODE starts blinking.
7 Turn the J-dial, select the "A AND B" for MODE, and
then turn the S-dial clockwise.
When detection method is accepted, the cursor moves to
the upper left position.
5
Repeat the same procedure to set both time periods
(TIME PERIOD A/B), select the camera channels and set
the sensors (A/B).
6
To exit, turn the S-dial counterclockwise.
Operation returns to the <ALARM REC MODE SET>
screen.
G-5 Motion sensor setting
MENU
(J)
(S)
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
7.ALARM REC MODE SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
3
CH01 CH03
The LEVEL and MODE settings can be different for the time
periods (T-1, T-2, T-3 and T-4) of TIME PERIOD A, but the
location of the motion sensor is fixed. The motion sensor
cannot be set to different locations for the different time
periods.
AB
CH03 T-2 LEVEL : 2 MODE : A AND B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
BBBB
BBBB
BBBB
BBBB
14 6 7
(S)