Filter
Top Products
General settings
How to set 68
English
L
1 DISK1
Displays the total capacity of the internal hard disk. If the hard
disk is replaced, the capacity may change.
2 DISK2
Displays the total capacity of the second hard disk, if it was
installed in the DVR.
3 DISK INITIALIZE
This item is used to initialize the internal hard disk. All
recordings are erased when the hard disk is initialized.
The initialization is performed on DISK1 and DISK2
simultaneously.
4 MIRRORING
If another hard disk is installed, and MIRRORING is turned
"ON", then a PLAYBACK DRIVE can be selected, and the
same video will be recorded on both hard disks. If a writing
error occurs, one of DISK1 and DISK2 can be used to read the
recordings.
• Note that if MIRRORING is turned "ON", the recording rate
will be automatically limited (to half of the normal recording
rate).
• If a playback problem occurs while MIRRORING is ON,
change the hard disk used for playback by selecting DISK1
or DISK2 at the "PLAYBACK DRIVE" setting.
5 PLAYBACK DRIVE
Use this setting together with MIRRORING, to designate one of
the two hard disks for video playback.
Selections: DISK1/DISK2
1
Display the <HDD SET> screen using "Displaying the
general settings screen". (P62)
The cursor moves to "DISK INITIALIZE".
2
Turn the S-dial clockwise.
The <WARNING> screen is displayed, and "NO" is blinking.
3
Turn the J-dial, select "YES", and turn the S-dial
clockwise.
The "HDD INITIALIZING !" message appears, and the
initialization starts.
When the initialization is complete, the <HDD SET> screen
returns.
4
Press the EXIT/OSD button.
D Hard disk settings menu description
<HDD SET>
DISK1 : 82GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING : OFF
PLAYBACK DRIVE : ***
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
1
2
3
4
5
D-1 Hard disk initialization
☞ Hard disk expansion
Before installing another hard disk, consult with the store where you
purchased your system.
We recommend using the expansion hard disk provided by SANYO.
Operation is not guaranteed if a hard disk other than SANYO's
recommended type is used for capacity expansion.
• The hard disks must be initialized, upon installing an expansion
disk. The initialization is performed on the two hard disks
simultaneously. Save your recordings on a CompactFlash card or
other media before the initialization.
MENU
(J)
(S)
<HDD SET>
DISK1 : 82GB
DISK2 : ---GB
DISK INITIALIZE ->
CAUTION : ALL RECORDING WILL BE ERASED!
4.HDD SET
3.GENERAL SET
<MAIN MENU>
<GENERAL SET>
HDD INITIALIZING !
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
EXIT/OSD