Filter
Top Products
Recording settings
49 How to set
English
This menu is used to set the picture quality, audio recording
and recording rate for the normal recording area. A program
number can be selected at the programmed recording
settings to use the recording rate set for that program. (P50)
1 PICTURE QUALITY
Selects the picture quality used to record video in the normal recording
area. The recording duration will change according to the selected
picture quality.
Selections:
BASIC: Rough image quality (BA)/15kB
NORMAL: Normal image quality (NO)/22kB
ENHANCED: Enhanced image quality (EN)/30kB
FINE: Fine image quality (FI)/42kB
SUPER FINE: Super fine image quality (SF)/50kB
2 AUDIO RECORDING
• When the AUDIO RECORDING is set to "ON", the letter "A" will be
displayed in front of the available recording rates (REC RATE).
Audio recording is possible when the total recording rate of the
cameras is within the range of A60~A1FPS.
• Audio will only be played when the playback speed is the same as
the rate of recording. Video and audio may slightly be out of synch.
3 REC RATE
The recording rate is limited by the pre-alarm and mirroring
settings. (P88)
☞ Refer to the recording rate and duration table. (P86)
4 REC PROGRAM GROUP (P50)
This menu is used to specify the cameras to be used in each group
(P-1~P-4) for programmed recording. After selecting the group, set the
program for the group.
Selections: OFF, P-1, P-2, P-3, P-4
1
Display the <NORMAL REC MODE SET> screen as
explained in "Displaying the recording settings screen",
and then turn the S-dial clockwise. (P39)
The PICTURE QUALITY "ENHANCED" starts blinking.
2
Turn the J-dial to select the desired PICTURE QUALITY
(example: FINE), and then turn the S-dial twice
clockwise.
The AUDIO RECORDING "OFF" field starts blinking.
3
Turn the J-dial to select the desired AUDIO RECORDING
(example: ON), and then turn the S-dial twice clockwise.
The letter "A" is displayed indicating AUDIO RECORDING,
and then the REC RATE starts blinking.
4
Turn the J-dial to select the desired REC RATE
(example: 6), and then turn the S-dial twice clockwise.
The REC PROGRAM GROUP "OFF" starts blinking.
5
Turn the J-dial to select the desired REC PROGRAM
GROUP (example: P-1), and then turn the S-dial
clockwise.
REC RATE will be displayed as ***.
6
Press the EXIT/OSD button to end the setting
procedure.
The operation display area displays the settings as shown
below.
D Normal recording area menu description
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 15FPS ( 51H)
REC PROGRAM GROUP : OFF
1
2
3
4
D-1 Normal recording area settings
MENU
(J)
(S)
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 15FPS ( 51H)
REC PROGRAM GROUP : OFF
4.NORMAL REC MODE SET
2.RECORD SET
<MAIN MENU>
<RECORD SET>
EXIT/OSD