Filter
Top Products
Basic settings
37 How to set
English
The time period setting allows for using different settings,
such as automatic scrolling, masking, motion sensor
detection settings for four periods of the day (for example:
early morning, morning, daytime and evening).
There are two timers (A and B) that can be set to control time
periods as shown below, allowing for a wide variety of
settings to suit every surveillance need.
1
Display the <TIME PERIOD SET> screen as explained in
"Displaying the basic settings screen" (P34).
The <TIME PERIOD SET> screen appears.
2
Set the timing for TIME PERIOD A.
Example:
T-1: 6:30am, T-2: 11:30am, T-3: 1:30pm, T-4: 6:30pm
1 Turn the S-dial clockwise.
The first "00" of "T-1" starts blinking.
2 Turn the J-dial to select "06" under T-1, and then turn
the S-dial clockwise.
3 Turn the J-dial to select "30" under T-1, and then turn
the S-dial clockwise.
Repeat the same procedure through T-4 to set the timing
of the periods.
3
Set the timing for TIME PERIOD B.
Example:
T-1: 7:30am, T-2: 10:30am, T-3: 2:30pm, T-4: 7:30pm
1 Turn the J-dial to select "07" under T-1, and then turn
the S-dial clockwise.
2 Turn the J-dial to select "30" under T-1, and then turn
the S-dial clockwise.
3 Repeat the same procedure through T-4 to set the
timing of the periods, and then turn the S-dial
clockwise.
When time setting is accepted, the cursor moves to the
automatic scrolling (SEQUENCE).
E Time period setting
12
01
05
09
12
01
05
09
12
01
05
09
01 02 03 04
13 14 15 16
05 06 07 08
09 10 11 12
16
01 02 03 04
13 14 15 16
05 06 07 08
09 10 11 12
0
01
0
01
0
01
(Time period B, sample)
☞7:30 – 10:30
Mask setting for unnecessary
areas
(Time period A, sample)
☞6:30 – 11:30
Automatic screen scrolling
☞11:30 – 13:30
Motion sensor setting
☞13:30 – 18:30
Automatic screen scrolling
☞18:30 – 6:30
Motion sensor setting
☞10:30 – 14:30
Automatic screen scrolling
☞14:30 – 19:30
Mask setting for unnecessary
areas
☞19:30 – 7:30
Motion sensor setting
MENU
(J)
(S)
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
5.TIME PERIOD SET
1.INITIAL SET
<MAIN MENU>
<INITIAL SET>
TIME PERIOD A 06:30 11:30 13:30 18:30
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 07:30 10:30 14:30 19:30
TIME PERIOD B 00:00 00:00 00:00 00:00