Filter
Top Products
Recording settings
55 How to set
English
The following settings can be performed under the alarm recording settings.
Alarm recording (P56)
These settings control the picture quality, audio recording and
recording rate for the alarm recording area, when an alarm is
detected.
Pre-alarm recording (P57)
These settings control the recording rate and the duration for
pre-alarm recording.
Alarm trigger (P57)
Selects the alarm detection method.
Motion sensor (P58)
1 ALARM RECORDING
Turns alarm recording ON or OFF, and whether alarm recording should
be performed during timer-controlled recording.
When "OFF" is selected, the settings up to PRE-ALARM RECORDING
are disabled.
Selections:
OFF: Alarm recording is not performed.
ENABLED:
Alarm recording is performed, regardless of timer-controlled
settings.
AL-REC ON TIMER:
Alarm recording is performed only during timer-controlled
recording.
AL-REC OFF TIMER:
Alarm recording is performed only when timer-controlled recording
is not.
OLY AL-RC ON TMR:
Alarm recording is performed only during the period specified by the
timer setting. If this setting is selected, timer-controlled recording,
and the TIMER button will be disabled.
2 PICTURE QUALITY
Select the picture quality of the recordings.
Selections:
BASIC/NORMAL/ENHANCED/FINE/SUPER FINE
3 AUDIO RECORDING
Audio recording can be switched ON or OFF.
Audio recording can only be set if the recording rate is in the range of
30~1 FPS. When audio recording is selected, an "A" is displayed in
front of the recording rate. Since both audio and video will be stored in
the alarm recording area, the recording capacity of this area will
decrease.
If the recording rate is out of this range, audio recording will not be
performed; even if audio recording was set.
4 ALARM INTERLEAVE (recording pattern)
Selections:
ONLY: Records only the live video where the alarm occurred.
SW: Alternately records the live video from the camera where the
alarm occurred and the live video from all connected cameras.
5 REC RATE
The following settings can be selected:
Selections:
30, 20, 15, 10, 7.5, 6, 5, 4.286, 3.75, 3.333, 3, 2.727, 2.308, 2, 1.667,
1.429, 1.25, 1.111, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
Audio recording can only be set when this setting is within the range of
30~1 FPS.
6 DURATION
Selects the recording duration for a single alarm event from the
following selections:
5SEC/10/20/40/1MIN/2/3/4/5/10/15/CC
CC: Recording is performed as long as the alarm is present (minimum
5 sec).
7 PRE-ALARM RECORDING
OFF: Pre-alarm recording is not performed.
ON: Pre-alarm recording is performed.
8 REC RATE
Refer to the pre-alarm recording time under recording rate
settings. (P88)
9 DURATION
Refer to pre-alarm recording time. (P88)
F ALARMS CAN BE RECORDED (number of alarms that can
be recorded)
G ALARM TRIGGER
Selects the alarm detection method from the followings:
Selections:
ALARM:
Performs alarm recording when an external alarm is detected.
SENSOR:
Performs alarm recording when a motion sensor detects
movement. (P58)
ALARM AND SENSOR:
Performs alarm recording when an external alarm and a motion
sensor alarm are detected simultaneously.
ALARM OR SENSOR:
Performs alarm recording when either an external alarm or a motion
sensor alarm is detected.
H MOTION SENSOR
Displays the motion sensor setting screen.
G Alarm recording settings menu description
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
1
3
5
8
G
2
6
9
4
7
F
H
G-1
G-2
G-3
G-1
G-4