Sanyo VA-SW8000LITE DVR User Manual


 
English 118
DVR Management Menu (Required user access level: ID4)
On this tab, you can configure motion sensor detection settings and camera titles for each channel
of the connected DVR.
The motion sensor, when enabled, automatically detects an alarm condition based on the
movement of a subject shot by the camera.
7 TITLE/MOTION SET Tab
This tab is only displayed when you are connected to a 4-channel DVR.
To trigger the alarm recording mechanism with the motion sensor, set [ALARM
TRIGGER] to an option other than “ALARM” on the REC MODE SET tab.
1
3
4
6
2
5