Sanyo VA-SW8000LITE DVR User Manual


 
English 96
DVR Management Menu (Required user access level: ID4)
b [System Update] Window
You can update the firmware of your specified DVR through the following steps:
1
Choose a camera (DVR).
From the tree list, select a camera
connected to the DVR whose firmware
you want to update. The selected camera
is highlighted in blue.
2
Specify the new firmware file.
Click [Browse..] to open a file list. Locate
and select the new firmware file, and
click the [Open] button.
The [FILENAME] box is populated with
your specified file name.
3
Click .
You are prompted to choose whether to
update the firmware. If you click [YES],
the system starts updating the firmware.
4
Wait until the update process
completes.
You are presented with a dialog that
indicates that the update process is in
progress, and a green light flashes.
2
3
The firmware file you plan to broadcast must be stored on your computer’s hard disk before
you can broadcast it.
Do not use any other firmware file than that supplied from SANYO; doing so may possibly
damage the DVRs.
Before you can update the firmware, the DVR(s) must stop any playback or recording session
and the DVR Utility Software must display live video.
The update process takes a few minutes. Do not turn off the power or disconnect your
computer from the network while updating is in progress.