Sanyo VA-SW8000LITE DVR User Manual


 
91 English
Initial Set Menu (Required user access level: ID4)
You can change the user ID, password, or user access level of an existing user. To do so, follow
these steps:
1
Choose a user.
On the user registration list, select the
user whose information you want to
change. The selected user is highlighted
in blue, and the user’s registration
information appears.
2
Change the registration information.
Change the user ID, password, and/or
user access level through the same
steps you follow when registering a new
user.
3
Click .
When you change the user ID and/or
user access level but not the password,
the user registration list is immediately
updated to reflect your changes.
If you change the password, you are
prompted to confirm the password by
reentering it. In this case, proceed to
step 4.
4
Enter the current and new passwords.
On the dialog, enter the currently defined
password into the [CURRENT] box, and
reenter the new password to the [NEW]
box. The password entered into the
[NEW] box must be identical to the one
you specified in step 2.
If your entered current and new
passwords are correct, the registration
process is completed, and the user
registration list is updated to reflect your
changes.
Changing the Registration Information of an Existing User
2
3
1
An error message appears if your
reentered password does not match the
one you specified. If this is the case,
reenter the correct password.