Sanyo VA-SW8000LITE DVR User Manual


 
English 50
Downloading Recorded Video
3
Once you have determined the start point, click [START POINT] (2).
The download start point is established at the position where the playback point was residing
when you clicked the [START POINT] button (actually, the date and time values of the time
stamp displayed on the time display at that time are used as the values of the start point). Then
the START POINT button turns red. A green band that indicates the download range appears
on the scale. The left edge of the band is marked with a red line that identifies the start point.
(To reset the start point, click [START POINT] again.)
4
Define the end point.
Define the end point in the same procedure as the start point. Since the start point has already
been determined, you can only slide the scale to the left.
5
Once you have determined the end point, click [END POINT] (3).
The download end point is established, and the [END POINT] button turns blue. The right edge
of the band that indicates the download range is marked with a blue line that identifies the end
point.
(To reset the end point, click [END POINT] again.)
Click [START POINT].
The start point is established, and a green band appears.
Drag to the left to specify the end point.
Click [END POINT].