Sanyo VA-SW8000LITE DVR User Manual


 
English 90
Initial Set Menu (Required user access level: ID4)
To register a new user, configure the user ID, password, and user access level through the following steps:
1
Enter the user ID into the [USER ID] box.
Enter the user name (user ID) that is
used to identify the user on the network.
The user ID can consist of up to 16
characters including letters
(case-sensitive) and numbers. You can
also use these special characters: :./*
2
Enter the password into the [PASSWORD]
box.
Enter the password that is required to
authenticate the user at login time.
The password can consist of 4 to 16
characters including letters
(case-sensitive) and numbers. You can
also use these special characters: :./*
3
Choose a user access level.
Select one of the four user access levels
by clicking the corresponding radio
button. For more information, see P11.
Available options:
ID1 (Monitoring user), ID2 (Playback user),
ID3 (Recording user), ID4 (Administrative user)
4
Click .
You are prompted to confirm the
password by reentering it.
5
Reenter the password.
Be sure to reenter the new password to the
[NEW] box. This must be identical to the
one you specified in step 2. Then click
[OK].
When the reentered password is correct,
the registration is completed, and the
user registration list is updated with the
newly registered user ID (user name)
and user access level.
Registering a New User
1
2
3
44
5
The user ID (user name) must be
unique. If your specified user ID is
already in use, a “duplicate”
message appears.
An error message appears if your
reentered password does not match the
one you specified. If this is the case,
reenter the correct password.