TANDBERG 2200 VCR User Manual


 
41
Current status
Recording ID
gatekeeper
state
Recording
console ID
gatekeeper
state
Auto
attendant ID
gatekeeper
state
The status of a folder's IDs with respect to its
H.323 gatekeeper registration. The possible states
for each folder ID are:
n/a
This ID is not configured to be registered
with a gatekeeper; because of this, there is
no applicable registration status to show.
Registering
This ID is in the process of registering
with the gatekeeper.
Deregistering
The ID is in the process of unregistering
with the gatekeeper. This might occur if:
o Gatekeeper registration has been
turned off for the entire IP VCR
o Registration of folder IDs has
been turned off for the entire IP
VCR via the
Settings >
Gatekeeper page
o The configured gatekeeper has
just been changed and the IP
VCR is in the process of
unregistering from the previous
gatekeeper before registering
with the new one.
Re-registration pending / Retry timeout
If the IP VCR fails to register an ID with
the gatekeeper, it enters these states
temporarily before re-attempting the
registration.
<number> registered
The ID has been registered successfully
with the gatekeeper using the number
indicated.
<no ID set>
The ID is configured to register with a
gatekeeper, but has not had a numeric
identifier set.
Point to point
call incoming
prefix
Displays the prefix that the H.323 gatekeeper uses
to identify which calls to route though the IP VCR
for the purposes of making point-to-point
recordings.
For more information about this prefix, refer to the
table above.
External
storage state
Indicates whether the server is responding or not
and, if it is responding, the amount of free space is
displayed.