Filter
Top Products
80
SNMP on Port B.
Note that by default SNMP Traps are sent to port
UDP port 162 (on the destination network
management station); this is configurable. For
more information, refer to
Configuring SNMP
settings.
H.323
gatekeeper
Defines the ports for the H.323 gatekeeper. If a port is disabled, this option will be unavailable.
You must use the same port number for both Port
A and Port B. The number is automatically
refreshed for Port B. You cannot change the Port B
UDP port numbers and they are always grayed-out;
if you want to open Port B for the H.323
gatekeeper, ensure that you have the video firewall
as an activated feature (refer to
Upgrading the
firmware) and you have checked the tickbox for
H.323 gatekeeper on Port B.