Filter
Top Products
Installation
A Quick Tour
1 --- 2
Release Lever
OA 5000
TM 5000 Series
Power Module
Figure 1-1: Installing the OA 5000 into the Power Module
If you will be programming the OA 5000 over the GPIB, perform the following
additional step:
Step 3: Attach the GPIB cable from your instrument controller to the
GPIB connector located on the back of the TM 5000 Power Module.
Before removing the OA 5000 from the power module, turn the power mod-
ule off.
To remove the OA 5000 plug-in, grab the release lever and pull the instru-
ment out.
Removing the
OA 5000