Filter
Top Products
A Quick Tour
A Quick Tour
1 --- 4
DISABLE
MIN ATT
STORE 1 RECALL 1
STORE 2 RECALL 2
REMOTE MODE
SET REF
COARSE
FINE
WAVE-
LENGTH
ADDR
(SET)
Figure 1-2: OA 5002 Front Panel
Use the store and recall buttons to save one or two attenuator settings for
use at a later time.
Step 7: Using the COARSE knob, set the attenuation to 10.00 dB.
Step 8: Store the attenuation setting by pressing STORE 1.
Step 9: Change the attenuation setting, using both the COARSE and
FINE knobs, to 21.50 dB.
Step 10: Store the attenuation setting by pressing STORE 2.
Step 11: Press MIN ATT and then press RECALL 1.
Storing and
Recalling Settings