Filter
Top Products
A Quick Tour
A Quick Tour
1 --- 6
Step 21: Recall the second stored setting by pressing RECALL 2.
Note that the attenuation readout is now 29.50 dB. Remember that you
set STORE 2 to 21.50 dB. The display shows the value: 21.50 ---
(---8.00)= 29.50 dB.
Step 22: Push the MODE button so that just the ATT indicator is lit, and
then push MIN ATT.
Notice that the ATTENUATION display is now 0.00, because you
pressed the MIN ATT button and the display is no longer in reference
mode.
Settings at Power Up
One last thing to note are the settings used at power up. When you power
down the OA 5000, it saves the attenuation setting, the mode, the wave-
length, and reference levels. The next time you power up the OA 5000, it will
return to the settings stored when it was last powered down.
This completes the tour of the OA 5000.