Filter
Top Products
Setting Up the Instrument
OA 5000 Series User Manual
3 --- 3
Setting the GPIB Address
Once you have connected the OA 5000 through the GPIB interface, you
need to set its GPIB address to allow it to communicate through the inter-
face.
To set the GPIB address:
Step 1: Press the ADDR (SET) button so that it is lighted. The ATTEN-
UATION display will change to read Addr and the GPIB address will be
displayed in the WAVELENGTH display.
Step 2: Use either the COARSE or FINE knobs to change the address.
Step 3: When the address is set, press the ADDR (SET) button again
to enter the change of address.
Once you have set the address, you can control the OA 5000 through the
GPIB interface.