Filter
Top Products
44
PRV-LX1
En
Recording
EDIT section = [DVD Disc] = [Finalize]
Finalize confirmation dialog
Finalize progress bar (appears during finalization)
Recording from HDD to DVD
Following recording of a video program to the hard
disk drive, editing of the DVD menu and title can be
performed before final recording to DVD disc.
Use the EDIT section = [DVD Disc] = [Make Disc]
command to create discs. Use the EDIT section =
[DVD Disc] = [Make Disc] = [Target] command to
select the drive “DVD1”, “DVD2” or “DVD1&2” for
recording.
A disc can record a maximum of 4400 MB (approx. 4.3
GB (1GB = 1024 MB). When the total volume of the
selected titles exceed 4400 MB, reduce the number
of titles (see “Title Order Edit” on page 65) or reduce
clip size (see “Title Trimming” on page 63).
The disc cannot be removed until the Make Disc
process is completed.
EDIT section = [DVD Disc] = [Make Disc]= [Target]
Use the EDIT section = [DVD Disc] = [Make
Image] command to create image files.
The [Target Image] will display in the initial condition
the “project name” + the three-character “.img”
extension. If the image file name is changed, the
image file name will remain the same even if the
project name is subsequently changed. For
characters supported in file names see the section
“About File Names” on page 94.
Note:
The total post-editing program size must be within
the capacity of the DVD disc or recording will not be
possible.
EDIT section = [DVD Disc] = [Make Image]
Note:
When [Finalize], [Make Disc] and [Make Image]
commands are executed, a DVD-Video is created
with the menu set in DVD Menu.