Filter
Top Products
58
PRV-LX1
En
DVD Menu Editing
Setting an Idle Clip
An idle clip (a clip played automatically after a
specified waiting time from the menu display mode)
can be set by using the [DVD Menu] = [Navigation
Cmd] = [Idle Clip] command on the EDIT section of
the Function Menu.
The clip is played repeatedly until the ENTER key is
pressed to return to the menu display. The waiting
time can be set with the [Waiting Time] command.
Note 1:
The idle clip must be set to the same TV system as
that on the menu.
Note 2:
The type of audio must be the same for both idle clip
and opening clip.
Note 3:
An opening clip can be set only for HDD projects.
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Idle Clip]
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Waiting Time]
Setting Navigation Commands
Using the [DVD Menu] = [Navigation Cmd] =
[First Play PGC] command on the Function Menu’s
EDIT section, you can set the first play setting for a
DVD-Video disc (when opening clip is set, whether
opening post command is set to “Stop”, “Title” or
“Menu”).
This item is reflected to [Make Disc], [Make Image]
and [Finalize] command regardless of “No Menu”
on DVD menu type selection.
EDIT section = [DVD Menu] = [Navigation Cmd]
= [First Play PGC]
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Post Cmd]
Also, the EDIT section = [DVD Menu] =
[Navigation Cmd] = [Title Post Cmd] command
can be used to control the action taken upon
completion of each title’s playback, including stop,
return to menu, next title or repeat title.
EDIT section = [DVD Menu] = [Navigation Cmd]
= [Title Post Cmd]