Filter
Top Products
82
PRV-LX1
En
Function Menu Table
EDIT
APP
Title
DVD Disc
Auto Capture
Cpy/Impt/Bkup
Title Selection
Finalize
Initialize
Unfinalize
Make Disc
Make Image
IN/OUT Point
Chapter Point
EDL Command
EDL
EDL Load/Delete
EDL Save
Disc Copy
Disc Image Copy
Image Copy/Del
Clip 1
Clip 2
Clip 3
Clip 4
Clip 5
Next Page
Finalize
Initialize
Unfinalize
Target
Target Image
Preroll Time
Offsest(Frame)
Record As
IN/OUT Point
Chapter Point
Command
IN/OUT Point 1
IN/OUT Point 2
IN/OUT Point 3
IN/OUT Point 4
IN/OUT Point 5
Next
Load
Delete
Save To
Source
Destination
Source
Input Image Name
Source Image
CLEAR/ALL CLEAR/UP/DOWN/
CLIP LIST
Selected Drive
Quick Format
Full Blank
Selected Drive
DVD1
DVD2
DVD1&2
File Name Input
1 - 5 - 10 Seconds
0 -- 17 -- 30 Frame
Title(Stop)
Chapter(Pause)
Pause
(Time Code Setting)[Mark]
(Time Code Setting)[Mark]
Finalize
Initialize
Wait
CLEAR/ALL CLEAR/UP/DOWN
EDL List
EDL List
File Name Input
DVD1
DVD2
DVD1
DVD2
DVD1
DVD2
File Name Input
File Name Input
Display the clip with the assigned title
and edit in order.
DVD finalize.
Use Quick Format to initialize DVD-
RW disc.
Erase all DVD-RW contents.
Canceling finalization of DVD-RW.
Select destination for recording
selected project to disc and execute.
Enter the name for the selected project
and create disc image file.
Set pre-roll time.
Set frame offset.
Select OUT point operation.
Set IN/OUT point.
Set chapter point.
Designate additional special
command to EDL.
Perform editing of EDL.
Loads selected EDL.
Delete selected edit list.
Save EDL or save with new name.
Select copy source.
Select copy destination.
Select the copy source.
Enter the filename of the file to be
created.
Select the copy source or the file to
be deleted.
Note: Items in bold type are backed up and restored in the section “Backing up and Restoring
System Settings” (page 77).