Filter
Top Products
47
PRV-LX1
En
Playing Discs
7
To search for a desired scene (SEARCH function)
[Title Direct Search]
During playback:
1. Press the
TITLE/CHP
FRM/TIME
button.
2. Use the number buttons to enter the number
of the desired title.
Example: to select title “3”
Press number button
3
.
Example: to select title “10”
Press number buttons
1
=
0
in order.
3. Press
SEARCH
button.
Search can also be initiated by pressing the
PLAY
button.
During Stop Mode:
During stop mode, use the number buttons to
perform title search.
Example: to select title “3”
Press number button
3
.
Example: to select title “10”
Press number buttons
10
>
=
1
=
0
in order.
[Chapter Search]
1. Press
TITLE/CHP
FRM/TIME
button twice.
2. Use the number buttons to enter the chapter
number.
Example: to select title “3”
Press number button
3
.
Example: to select title “10”
Press number buttons
1
=
0
in order.
3. Press
SEARCH
button.
Search can also be initiated by pressing the
PLAY
button.
Note:
The search function cannot be used on discs
displaying the “Operation Inhibited” message.
[Chapter Direct Search]
During playback, use the number buttons to perform
chapter search.
Example: to select title “3”
Press number button
3
.
Example: to select title “10”
Press number buttons
10
>
=
1
=
0
in order.
Note:
The search function cannot be used on discs
displaying the “Operation Inhibited” message.
[Time Search]
1. During playback, press the
FRM/TIME
button.
Alternately, press the
TITLE/CHP
FRM/TIME
button three times.
2. Use the number buttons to enter the desired
time number.
Example: to designate the frame at 21 min 43
sec 17
Press number buttons:
2
=
1
=
4
=
3
=
1
=
7
in order.
3. Press the
SEARCH
button.
The selection can be made also by pressing the
PLAY
button.
Note 1:
The search function cannot be used on discs
displaying the “Operation Inhibited” message.
Note 2:
When performing time search on DVD-video
discs, actual playback may begin at a point
somewhat separated from the designated time
number.
Note 3:
Time search cannot be performed from the stop
mode.
Note 4:
Depending on the structure of the DVD-Video
used, some errors may occurs when time search
is performed for time numbers located in a range
extending from several frames before to several
frames after the divisions between titles and
chapters.
7 Frame Advance/Still Picture
[View a stopped (still) image]
Press the main unit’s PAUSE/STEP FWD button,
or the remote control unit’s
PAUSE
/
STEP
button.
Note:
The still picture function cannot be used on discs
displaying the “Operation Inhibited” message.
[Frame Advance Playback]
Press the
STEP
button.
Each time the
STEP
button is pressed, playback will
advance by one frame.
Each time the
STEP
button is pressed, playback will
reverse by one frame.
Note:
The frame advance function cannot be used on discs
displaying the “Operation Inhibited” message.