Filter
Top Products
54
PRV-LX1
En
Regarding Progressive Scan Output
This unit allows the output of progressive scan video
signals from the component output connector. To
turn progressive scan output ON/OFF, press the
controls on the front panel:
Press these buttons simultaneously.
Note 1:
Switching is only possible during idling.
Note 2:
Be sure the unit is connected to a television monitor
supporting progressive-scan. Proper image
reproduction will not be produced with other
monitors.
Note 3:
When progressive output is ON, image signals will
not be produced from output connectors other than
the component output connector.
Note 4:
Some progressive scan monitors currently available
do not possess complete compatibility with the PRV-
LX1, with the result that some image distortion may
occur. If such distortion is observed during
progressive scan playback, set the PRV-LX1’s output
to interlaced.
Note 5:
Progressive is supported during NTSC output only.
Playing Discs