Filter
Top Products
19
2
Installation
Inspection
Damage
When you receive your dc source, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office
immediately. The list of Agilent Sales and Support Offices is at the back of this guide. Warranty
information is printed in the front of this guide.
Packaging Material
Until you have checked out the dc source, save the shipping carton and packing materials in case the unit
has to be returned. If you return the dc source for service, attach a tag identifying the owner's name and
address, the model number, and a brief description of the problem.
Additional Items
Table 2-1. Items Supplied
Item Part Number Description
Power Cord contact the nearest Agilent
Sales and Support Office
A power cord appropriate for your location.
4 - Output
connectors
1253-4893 A 6-terminal connector plug for connecting the output,
sense, ground, and guard. The connector installs in the
back of the unit.
Trigger
connector
1252-8670 3-terminal digital plug for connecting the trigger input
signal. The connector installs in the back of the unit.
Line Fuse 2110-0638
2110-0773
3.15 AT (time delay) for 100/120 Vac operation
1.6 AT (time delay) for 220/230 Vac operation
User's Guide 5964-8248 This manual.
Cleaning
Use a dry cloth or one slightly dampened with water to clean the external case. Do NOT open the unit.
WARNING: To prevent electric shock, unplug the unit before cleaning.