Filter
Top Products
11
Introduction
Ramp Compensation with and without LDS Lenses:
The WRC-2 can automatically compensate speed
and iris ramps. In order to compensate the ramps by
the iris, a CLM-1 or CLM-2 motor has to be attached
to the camera and the mounted lens has to be
selected in the WRC-2. This is done automatically
when using LDS lenses (Master Prime or LDS Ultra
Prime). For other lenses an Iris Table can be easily
created following a few steps in the Lens Manager.
The lens can then be stored in the WRC-2 internal
memory.
Modular System
The WRC-2 works with the ARRI Wireless Remote
Control system and attaches to the Wireless Main
Unit WMU-2 and WMU-3.
It can be wired to an ARRIFLEX or ARRICAM either
directly or via a Wireless Handgrip Attachmend
WHA–2 or WHA-3 using a standard LCS cable.
The knob module can be removed to keep the unit as
small as possible, if desired.