Filter
Top Products
45
Ramp Control Menu
The exposure calculation is a very powerful feature of
the WRC-2. It reduces the workload of a ramp exposure
calculation to a simple transfer of the exposure value
from a light meter to the WRC-2.
Once the working f-stop for a shot is determined by the DP
and entered in the WRC-2, all exposure compensations
will be calculated automatically.
To Enable the Exposure Calculation:
● In the Ramp Menu click on „Options“
● Check „Enable“ in the Exposure Meter Window
● Enter speed and shutter values of the exposure meter
that is used on the set. (values will be stored)
● Click „Exit“ to go back to the Ramp Menu
Use the Exposure Calculation:
● Measure the light to determine the working f-stop.
● Click on the „Exposure Meter“ Window and enter the
working f-stop by using the sliders.
● Read the calculated f-stop in the Iris Display and set
the iris value on the lens.
Note: Since there is no compensation selected,
the current settings will lead to a two stop
underexposure. See the Exp. Diff. (Exposure
Difference) indicator window.
14.4 Exposure Calculation
RaMp optionS Menu
RaMp ContRol Menu