Filter
Top Products
50
Appendix
16. Appendix
16.1 Updating the WRC-2
● Connect an USB Stick with the update software to
the mini-USB connector „MEM“ of the WRC-2. Use
the provided adapter cable to adapt from an USB
stick to the Mini-USB connector.
● Open the WRC-2 Settings Menu.
● Click „Service“.
● Click „SW Update“.
● Check if version from memory stick is displayed.
If not, check USB stick connection.
● Click „Update“ to upload the new software.
● Click „OK“. The unit will boot with the new software.
WRC SettingS Menu
Main Menu
SeRviCe MenuupDate Menu