Filter
Top Products
47
In the Ramp Options Menu the Exposure Calculation and
Iris Control can be enabled. Also the Ramp Direction can
be changed and ramps can be saved and loaded.
● In the Ramp Menu click on „Options“ to enter the
Ramp Options Menu.
Change Ramp Direction:
● Click on „Change Ramp Direction“ in the Ramp
Window and conrm the safety message.
Set to Default
● Will reset all ramp parameters to a standard speed
ramp to provide a basic setting.
Safe and Load a Ramp
Save a Ramp
● Click on „Save Ramp as“ to save the actual Ramp.
Note the name of the folder.
Load a Ramp
● Click on „Load Ramp“ and navigate to the folder where
the Ramps are saved.
14.6 Ramp Options
RaMp ContRol Menu
RaMp optionS Menu
Ramp Control Menu