Filter
Top Products
38
Lens Manager Menu
13.3 Creating new Iris Tables with the Iris Table Wizard
● Click on the headword „<new>“ in the User Iris List and
click „Edit Iris Table“. This will start the Iris Table Wizard.
Step 1
Enter the range of your iris
Some lenses may have a „CLOSE“
position where the iris is shut
completely. If so, check „Yes“ in the
box.
● Enter open and close iris values
of your lens.
Step 2
Mount Lens Motor and Calibrate
● Attach a Controlled Lens Motor
(CLM-1/2) to the LDB or UMC.
● Start calibration.
Note: Alternatively the buttons
on WMU-2/3 or WHA-2/3 can be
used.
Step 3
Toggle stop position
Depending on how the lens was
mounted the iris may not be in the
open position at this stage.
● Click Toggle if the iris is not on
the open position.