ARRI WRC-2 Universal Remote User Manual


 
12
5.1 WRC-2 in wireless mode
Transmitting:
In order to be able to use the WRC-2 in wireless
mode, it must be mounted on a Wirless Main
Unit (WMU-2 or WMU-3) as a transmitter. The
Main Unit supplies the WRC-2 with power and
establishes the radio link with the camera.
Up to three WMU can be used simultaneously,
therefore the WRC-2 can be controled by one
operator while e.g. the focus unit can be controlled
by another operator. Please refer to the LCS
instruction manual for further details.
Receiving:
On the camera side, a receiver is needed. When
using ARRICAM cameras, the receiver is built
in the Lens Data Box. When using 435, the
receiver is the Universal Radio Module (URM-3).
This device has to be mounted to the Function
Expansion Module (FEM-1 or FEM-2) When
using other cameras, the Universal Radio Module
(URM-3) can be used as a receiver.
5. Setup
Setup