Filter
Top Products
42
Ramp Control Menu
In order to compensate ramps via the iris or to program
an iris ramp, please check if:
1.) The Iris Table is activated in the Lens Manager
To activate an Iris Table navigate to the Lens
Manager. Please refer to chapter 13.
2.) The Iris Control is enabled.
To enable the Iris Conrol:
● In the Set Ramp Menu, click on „Options“.
● In the Options Menu, click on „Enable Iris Control“.
If you can not activate the checkbox, no lens is
mounted. Please navigate to the Lens Manager
(see Chapter 13) and mount a lens.
Note:
When the Iris Control is enabled, the iris motor will
set the iris automatically to the value entered in
the Ramp Control Menu. To manually set the iris,
switch the Iris Control off.
14.1 Enabling the Iris Control
RaMp ContRol Menu
RaMp optionS Menu