Filter
Top Products
13
5.2 Mounting the WRC-2 on
the WMU-3 or WMU-2
● Switch off the Wirless Main Unit WMU by pressing
the ON/OFF button.
● With the wide black pin pointing forward, insert the
WRC-2 into the free space on the WMU. Then press
the WRC-2 onto the WMU until the module audibly
snaps into position.
● Select the same radio channel on the WMU and on
the receiver (e.g. Lens Data Box)
Note:
The WRC-2 can not be mounted on a WMU-3
together with other modules without using the
Wireless Expansion Bracket (WEB-3).
Note:
Do not seperate the hand control units from one
another when they are switched on, as this can
result in randomly set lens limits.
Setup