Filter
Top Products
52
Appendix
16.4 Troubleshooting
Communication Problems:
In the event of a communication failure between the
WRC-2 and the LCS Device or the Camera, the EDIT
button will turn red and a dot will run across the text.
To solve the problem, check all cable connections and
restart the unit.
When using the WRC-2 wireless via a WMU-3 or
WMU-2, try the following:
1.) Connect both units, receiver (e.g. Lens Data Box)
and transmitter (e.g. WMU-3) via the WC–A3 antenna
cable to eliminate possible transmitting errors.
2.) Select a different channel on transmitter and receiver
and restart the camera.
Wait for a ashing green RF signal on the LCS unit (FEM-
2, LDB, UMC-3 etc) and then restart the WMU-3.
No Speed setting available:
Check if the camera is set to „PS/CCU“ and not to
„NORM“.