Filter
Top Products
27
Camera Control Menu
On the right side of the screen, the actual camera
status is displayed. The color of the screen can alter:
cyan = standby
green = camera running
orange = inching
red = warning or not ready
The following values and settings are displayed:
Battery Voltage
Displays the Voltage value.
PS/CCU
Displays the camera setting PS/CCU or NORM. In
order to be able to change the speed settings, the
camera has to be set to PS/CCU.
When the camera is switched to NORM mode, all
other options are available (shutter, iris etc.).
LDS: e.g. 40mm T1.9
In this case, a 40mm LDS Ultra Prime is connected
to the camera. The widest f-stop is T1.9
Note: This f-stop value is not the actual f-stop, set
on the lens.
Message & Warnings Field
Error Messages will be displayed here.
Iris
The Iris value, that is actually set on the lens.
12.2 Status Window