Filter
Top Products
Chapter 1 Installing Hardware
30
1.6.3 Installing an I/O Card
Each Video Capture Card can come with an optional I/O card that enables to connect
sensor inputs and relay outputs. For NV7000 users who only install an optional I/O
card, please follow the steps.
1. Remove the computer cover.
2. Remove 2 brackets for PCI expansion slots. Save screws.
3. Connect the 2 cards with the I/O
cable as the right picture shows.
4. Insert the video capture card and the
I/O card into the available PCI
expansion slots and fix them.