Filter
Top Products
AVerMedia NV1000/3000/5000/7000 User’s Manual
1-Cam display
4-Cam split display
9-Cam split display
16-Cam split display
8-Cam split display
13-Cam split display
If you only have 4 cameras connected, the 8-Cam/9-Cam/13-
Cam/16-Cam split display modes will be disabled automatically.
3. Date/Time/Free Space
This bar shows the current time, frame size and the hard disk’s free space.
4. Recording
Click
to start recording. The button turns red when it is recording. Click it
again to stop.
5. E-Map
Click to load your desired map according to your demands. You can
change an E-map and locate cameras, sensors, and relays to desired positions.
The DVR system can support up to 8 E-maps. Load BMP or JPG files as E-Maps.
6. Network
Click
to allow inbound connections. When this function is enabled, the
button turns red. Click it again to disable all inbound connections.
7. System Configuration
You can configure camera setting, record setting, network setting, schedule
setting, backup setting, sensor setting, relay setting, alarm setting and user
setting by clicking
button.
8. PTZ
Click to configure an appointed PTZ camera. It will pop-up a PTZ setup
dialog. Users can configure a PTZ camera according to their demands.
9. Display/Playback
Users can switch between Monitor Screen and Playback Screen by clicking the
buttons.
10. Camera ID
In the Camera ID area, you can see number icons of the cameras. Under 1-Cam