Filter
Top Products
Chapter 1 Installing Hardware
34
1.8 Connecting Cameras and TV-out Cable
1.8.1 Connecting Cameras and TV-out Cable to NV 1000/3000/5000
After you finish installing the cards, please connect the BNC cable and the TV-out
cable to the Video Capture Card as below figure. When you attach cameras to BNC
connectors, please follow a numerical order indicated on the below figure to avoid
transmission problem. Cameras need to be connected in sequence from the top to the
bottom BNC terminals per card, starting from the left side to the right side on the
chassis.
1.8.2 Connecting Cameras and TV-out Cable to NV7000
After you finish installing the video capture cards, please connect cameras,
microphones, TV monitor, alarms and sensors as the following illustration.