Filter
Top Products
120 Brocade BigIron RX Series Hardware Installation Guide
53-1002483-03
Replacing cooling system components
5
FIGURE 46 Air filter removal and replacement for BigIron RX-8
3. Pull the air filter out of the chassis and discard.
4. Insert the replacement air filter by sliding it along the metal guides.
The filter is marked with an arrow. The arrow indicates how the filter should be installed in
regards to the direction of airflow in the chassis. Since air is pulled through the chassis, the
arrow must point right towards the fan tray.
Push the filter retainer into the chassis and tighten the two screws.
1 Direction of airflow in chassis 3 Filter retainer
2Filter 4Fan trap
1
2
3
4