CyberHome Entertainment 1600 DVR User Manual


 
OPERATION
Operation of control panel
1
DISC TRAY: For inserting discs.
2 VFD DISPLAY: The front Vacuum Fluorescent Display shows information about the unit’s
operational status.
3K : Opens or closes the disc tray.
4A / I : Press this button to start the playback of a disc. During playback, this is
used to pause a disc. Press this button again to resume normal playback.
5 RECORD: For recording the current TV channel or external video signals.
6 STANDBY/ON: To switch the device on or off. When switching the device off, you can only
go into standby mode. In order to switch the device completely off, please
remove the power cord from the device. Please note that the unit consumes
a slight amount of power in standby mode.
7 DV IN: i-Link/DV socket (digital video input, IEEE 1394, Fire Wire) for connecting
digital camcorders. To select, use the “SOURCE” button and select “DV”.
8 AUDIO IN L (white): Left audio input socket for connecting devices with analogue 2 channel
audio output, e.g. DVD player, camcorder, video recorder.
9 AUDIO IN R (red): Right audio input socket for connecting devices with analogue 2 channel
audio output, e.g. DVD player, camcorder, video recorder.
a VIDEO IN 2 (yellow): Video input socket for connecting devices with composite video output, e.g.
DVD player, camcorder, video recorder. To select, use the “SOURCE” but-
ton and select “Video 2”.
11
1
2
3
4 5 6
7
8
9 10