Filter
Top Products
INSTALLING YOUR DVD RECORDER
8 If you do not know the channel number of your TV station, you may also
enter the frequency. To do so, highlight the frequency bar by pressing
the button “D” on your remote control. Using the buttons “B” and “A”
you can change the channel frequency. The channel number will
change according to the selected frequency (and vice versa).
9 When the manual channel search is completed, press “ENTER” to
store the TV channel.
a To search for other TV channels, repeat from step 5.
b To end, press the “SETUP” button.
Automatic TV channel search
During initial installation, all available TV channels are automatically
searched for and stored. If the channel assignments of your cable or satel-
lite TV provider change or if you are reinstalling the DVD recorder, e.g. after
moving to another house, you can start this procedure again. This will
replace the stored TV channels with the new ones.
1 Turn on the TV and select the programme number for the DVD recorder,
if required.
2 Turn on the DVD recorder with the “POWER” button on the remote
control or the “STANDBY/ON” button on the front panel of the DVD
recorder.
3 Press the “SETUP” button on the remote control. The setup menu
appears.
4 Select the “General” setup page by pressing the direction buttons and
press “ENTER” to enter this page.
5 Select “Automatic search” with the button “D” on your remote con-
trol and confirm your selection by pressing “ENTER”.
6 The automatic TV channel search starts. The DVD recorder stores all
available TV channels. This may take some minutes.
7 When the automatic TV channel search is completed, press the
“SETUP” button to end.
29
Recording
Audio/Video
Disc
General
Help
Edit channel list
Automatic search
Manual search
OSD language
Menu language
Automatic search
78%
Channels found 8
Cancel
Note:
First you have to select the input source “Tuner” by pressing the
“SOURCE” button or the buttons “B” and “A” on your remote control.
Confirm with “ENTER”.
Tips:
Changing the TV system of a TV channel:
Use the direction button “B” or “A” to select in menu point "TV sys-
tem" the TV system that produces the least distortion of picture and
sound. You can choose between “PAL-BG”, “PAL-I”, “PAL-DK”,
“Secam-L”, “Secam-BG” and “Secam-DK”.