Filter
Top Products
25
CONNECTING ADDITIONAL DEVICES
Connecting audio devices to the analogue
audio sockets
Two analogue audio output sockets “AUDIO R/L” are located at the back
of the DVD recorder.
These can be used to connect the following:
• A receiver with Dolby Surround Pro Logic
• A receiver with two channel analogue stereo
Connect the stereo audio outputs of your DVD recorder with the correspon-
ding inputs on your receiver. Please use the red and white connectors on
the audio/video cable (not included in your accessory).
Connecting audio devices to the digital audio socket
At the back of the DVD recorder, there is a digital audio output socket
“COAXIAL” for a coaxial cable.
This can be used to connect the following:
• An A/V receiver or an A/V amplifier with a digital multi-channel
sound decoder (MPEG 2, Dolby Digital)
• A receiver with two channel digital stereo (PCM)
Connect the coaxial digital output of the DVD recorder with the correspon-
ding input on the AV receiver by means of a coaxial cable (not included in
your accessory).
R L
AUDIO R/L OUTPUT
RECEIVER
3
4
RECEIVER
COAXIAL OUTPUT
What is digital multi-channel sound?
Digital multi-channel sound offers you a maximum of sound quality. You
need a multi-channel A/V receiver or amplifier that supports at least one of
the audio formats of the DVD recorder (MPEG 2, Dolby Digital). For the for-
mats that your receiver supports, refer to the manual of the receiver.
A loud distorted noise comes from your loudspeakers:
In this case the receiver is not suitable for the digital audio format of the
DVD recorder. The audio format of the inserted DVD will be shown on the
TV screen when switching to another language by pressing the “AUDIO”
button. Playback with 6 channel digital surround sound is only possible, if
the receiver has a digital multi-channel sound decoder.