Filter
Top Products
62
PROGRAMMING A RECORDING (TIMER)
Programming a recording
1 Turn on the TV and the DVD recorder.
2 Then press the button “SCHEDULE” on your remote control. The timer
recording menu appears on the screen.
3 Use the direction button “D” to select a line for programming a new
recording and press the button “ENTER” to confirm.
4 To programme a recording proceed as following:
• At first, select the date (dd/mm) when you want to record by pressing
the direction buttons “C” and “D” or the number buttons “0-9” on
your remote control. If your settings are correct, please press the but-
ton “A” to enter the next input field.
• Then enter the start time (hh/mm) and length (hh/mm) with the num-
ber buttons “0-9” on your remote control or with the buttons “C” and
“D”.
• Then select the source from which you want to record. Use the but-
tons “C” and “D” to select. You can choose between: Programme 1
up to Programme 108, Video 1, Video 2, S-Video and DV.
• Next, please select if you want to activate or deactivate VPS/PDC.
• Then select the recurrence mode. The recurrence mode indicates how
often and when your scheduled recording shall start. You can select
between the following recurrence modes by pressing the buttons “C”
and “D” in the field “Repeat”:
Once: Recording that will only be made once.
Mo-Fr: Recordings that will be repeated daily from Monday to Friday.
Daily: Recordings that will be repeated daily.
Weekly: Recordings that will be repeated weekly (every week on the
same day).
Select the required recurrence mode and press the button “ENTER”
on your remote control to confirm your selection.
5 When all information are correct, “OK” will appear in the “Result” field.
6 Press the “SCHEDULE” button to end.
7 Insert a DVD+R/RW disc ready for recording. The current disc is
checked.
Recording
Audio/Video
Disc
General
Help
Timer rec 01/04/2005 11:18:13
Date Start Length
Source
Quality
PDC
Repeat
Result
--/---- --:-- --:-- --- -- -- ---- --
VPS/
“OK” does not appear in the “Result” field:
• If the recording overlaps with another programmed recording, “Over-
lap” will appear.
• If the time for the recording is overdue, “Overdue” will appear.
• If the entered value for the length of the recording is longer than the
maximum possible length for the selected recording quality, “Over-
flow” will appear.