CyberHome Entertainment 1600 DVR User Manual


 
SPECIAL PLAYING FUNCTIONS FOR DVD-VIDEO DISCS
Navigate around the menu using the direction buttons and press the but-
ton “ENTER” to select the highlighted item. Many DVD menus have mul-
tiple layers to navigate through. Exit the menu by following the menu
options to resume playback.
Displaying subtitles
Pre-recorded DVD-Video discs often come with subtitles in several lan-
guages. You can change the subtitle language of the current disc or switch
off subtitles at any time.
You can change the subtitle language either using the menu of the insert-
ed disc (“MENU” button) or the “SUBTITLE” button on your remote con-
trol. The subtitle languages in the menus may differ.
The number of available subtitles depends on the disc. Displaying subtitles
can be carried out as described below:
1 During playback, press the button “SUBTITLE” on your remote control.
Amessage is displayed on the screen indicating the language you have
selected.
2 To change the language that the subtitles are displayed in, press the
button “SUBTITLE” again until the required language is displayed. To
turn the subtitles off, press the “SUBTITLE” button until “Off” is dis-
played on the screen.
3 Playback continues in the new subtitle language.
Changing the camera angle
If a pre-recorded DVD-Video disc contains sequences recorded from differ-
ent camera angles, you can change the camera angle for playback. You
can choose among the available angles on the disc as described below:
1 During playback, press the button “ANGLE” on your remote control. A
message is displayed in the lower left corner of the screen indicating the
angle you have selected, followed by the total number of angles avail-
able.
2 To change the angle, press “ANGLE” again until the required view is
displayed. The number of angles depends on the content of the disc.
The screen will interchange to the selected angle after 1-2 seconds.
48
English 1/2
Off
Note:
Most discs with multi angle support will display an indicator or angle mark
that alerts the viewer that multiple angles are available for the current
scene.
1/5